Parameter

Short Description

Long Description

Column Cross Sec­tion

Rectangular, Circu­lar or Profiled.

Defined in Column Settings

Core Height / Diameter

For a rectangular or profiled Column: One of the dimen­sions of the Column in cross-section. (The other dimen­sion is "Core Width".)

Does not include veneer. (To include veneer, use the General "Width" parameter.)

For a circular Column: the diameter of the Column.

Core Width

For a rectangular or profiled Column: One of the two dimensions of the Column in cross-section. (The other dimension is "Core Height / Diameter".)

Does not include Veneer. (To include veneer, use the General "Width" parameter.)

For a circular Column: the diameter of the Column.

End Surface

Surface assigned to Column Ends.

Defined in Column Settings (via Building Material, or Override in Model Panel)

Extrusion Surface

Surface assigned to Column Extrusion.

Defined in Column Settings (via Building Material, or Override in Model Panel)

Gross Sur­face Area of the Core (without Top/Bot­tom)

Gross Surface Area of the Column Core on all sides.

Surfaces of the Column top/bottom are ignored.

Solid Element Operations are ignored.

Gross Sur­face Area of the Core Bottom

Surface area of the cross-section of the Core at the bottom of the Column.

Does not take any Solid Element Opera­tions into account.

Gross Sur­face Area of the Core Top

Surface area of the cross-section of the Core at the top of the Column.

Does not take any Solid Element Opera­tions into account.

Gross Sur­face Area of the Veneer (without Top/Bot­tom)

Gross Surface Area of the Column Veneer on all sides.

Surfaces of the Veneer top/bottom are ignored.

Solid Element Operations are ignored.

Gross Sur­face Area of the Veneer Bottom

Surface area of the cross section of the Veneer at the bot­tom of the Column.

Does not take any Solid Element Opera­tions into account.

Gross Sur­face Area of the Veneer Top

Surface area of the cross section of the Veneer at the top of the Column.

Does not take any Solid Element Opera­tions into account.

Gross Vol­ume of the Core

Gross Volume of the Column Core.

Solid Element Operations are ignored.

Gross Vol­ume of the Veneer

Gross Volume of the Column Veneer.

Solid Element Operations are ignored.

Maximum Height of the Column

For a Column cut e.g. by a slanted Roof: the highest point of the Column.

For a straight or slanted Column: equiva­lent to Height (General field).

Minimum Height of the Column

For a Column cut e.g. by a slanted Roof: the lowest point of the Column.

Net Surface Area of the Core (with­out Top/Bot­tom)

Net Surface area of the Column Core on all sides (but not the top or bottom).

Surfaces of the Column top/bottom are ignored.

Reduced by Solid Element Operations.

Net Surface Area of the Core Bot­tom

Surface area of the cross-section of the Core at the bottom of the Column.

Reduced by Solid Element Operations.

Net Surface Area of the Core Top

Surface area of the cross-section of the Veneer at the top of the Column.

Reduced by Solid Element Operations.

Net Surface Area of the Veneer Bot­tom

Surface area of the cross-section of the Veneer at the bot­tom of the Column.

Reduced by Solid Element Operations.

Net Surface Area of the Veneer Top

Surface area of the cross-section of the Veneer at the top of the Column.

Reduced by Solid Element Operations.

Net Volume of the Core

Net Volume of the Column Core.

Reduced by Solid Element Operations.

Net Volume of the Veneer

Net Volume of the Column Veneer on all sides.

Reduced by Solid Element Operations.

Perimeter of Column Profile (Bot­tom)

Perimeter of the Column profile at the bottom of the Column.

Profile plane is perpendicular to the Col­umn axis.

Perimeter of Column Profile (Top)

Perimeter of the Column profile at the top of the Col­umn.

Profile plane is perpendicular to the Col­umn axis.

Veneer Building Material

Name of Building Material assigned to Veneer

Defined in Column Settings

Veneer Sur­face Area

Net Surface area of the Column Veneer on all sides

Surfaces of the Veneer top/bottom are ignored.

Reduced by Solid Element Operations.

Veneer Type

Core, Finish or None

Defined in Column Settings

This setting affects the display of the Col­umn, depending on Partial Structure Dis­play Settings.