Curtain Wall Listing Parameters

Parameter

Short Description

Long Description

 

Curtain Wall Slant Angle

Slant Angle of the Curtain Wall

Same value as the General "Slant Angle" parameter.

 

Length

Length of element.

 

 

Number of Panels

Number of panels in the Curtain Wall.

 

CurtainWall_NumberOfPanels.png 

Pattern Angle

Rotation angle of the row Grid Lines measured clockwise from the column Grid Lines. This angle is defined in the Curtain Wall Scheme Settings/Grid Pattern panel, under Rows.

 

CurtainWall_PatternAngle.png 

Surface Area Includ­ing Bound­ary

Surface area of Cur­tain Wall, including the surface area of its Boundary Frames.

If the Boundary Frames are placed "Inside Grid" (Curtain Wall Settings/Cur­tain Wall System/ Member Placement: Place Boundary Frames "Inside"), then this parameter is equal to the general Sur­face Area parameter for the Curtain Wall.

If the Boundary Frames are placed "Out­side Grid" or "Centered on Grid", then the value of this parameter will exceed the general Surface Area parameter, because the Boundary Frames hang out over the boundary line.

 

If you use an Invisible type Frame for your Boundary Frames (Curtain Wall Settings/Curtain Wall System/Frames: Boundary), then the value of this parameter will be less than that of the general Surface Area parameter.

CurtainWall_SurfaceIncludingBoundary.png 

Total Length of Contour Frames

 

 

 

Total Length of Custom Frames

 

 

 

Total Length of Frames

Total of the lengths of all frames in the Curtain Wall. If the shape of the Frame is not uniform, then the value of the Frame length is cal­culated by taking the average of its shortest and longest lengths.

 

CurtainWall_TotalLengthOfFrames.png 

Total Length of Frames Belonging to the Main Axis

 

 

 

Total Length of Frames Belonging to the Sec­ondary Axis

 

 

 

Total Panel Surface Area

Total surface area of all the Curtain Wall panels. This value does not include the surface of the frames between the panels. Total Panel Surface Area is seen if you look at the Curtain Wall in Edit mode, with just the Panels visible.

 

CurtainWall_TotalPanelSurface.png 

Total Sur­face Area of Panels Fac­ing East

 

 

 

Total Sur­face Area of Panels Fac­ing North

 

 

 

Total Sur­face Area of Panels Fac­ing North-East

 

 

 

Total Sur­face Area of Panels Fac­ing North-West

 

 

 

Total Sur­face Area of Panels Fac­ing South

 

 

 

Total Sur­face Area of Panels Fac­ing South-East

 

 

 

Total Sur­face Area of Panels Fac­ing South-West

 

 

 

Total Sur­face Area of Panels Fac­ing West