Ruled Vaulted Shell

To create a Ruled Shell with the simple input method, you will define two profiles on parallel planes. With this input method:

The first profile is always a vault shape.

The second profile is always a straight line.

Here we will place a vaulted ruled Shell atop this wall complex.

WallNoShell.png 

1.Choose the Shell tool’s Ruled geometry method and the Simple input method.

RuledVaultIcon.png 

On the Floor Plan:

2.Click on each endpoint of the lower wall segment to define the width of the first, vault-shaped profile.

RuledVault1.png 

3.Drag the cursor to the opposite wall segment, then click on each endpoint of that wall to define the width of the second, straight-line profile.

RuledVault2.png 

4.The Ruled vault-shaped Shell is complete. View in 3D.

RuledVault300182.png 

In the 3D Window:

Here we will place a vaulted ruled Shell atop two pairs of columns of different heights.

RuledVault3D_1.png 

1.Choose the Shell tool’s Ruled geometry method and the Simple input method.

RuledVaultIcon00183.png 

2.Click on each of the two taller columns to define the width of the first, vault-shaped profile.

RuledVault3D_2.png 

3.Drag the cursor to the opposite, shorter columns and click on each to define the width of the second, straight-line profile.

RuledVault3D_3.png 

4.The Ruled vault-shaped Shell is complete. View in 3D.

RuledVault3D_4.png