Create Curtain Wall on the Floor Plan

1.Activate the Curtain Wall tool.

2.Choose the Polyline - Single geometry method from the Info Box.

CW1Tool.png 

3.Draw a Reference Line representing the length of the Curtain Wall.

Note: If your Scheme has a fixed-size grid pattern, the ghost feedback and pencil/snap point indicate where the next pattern segment will be complete.

FixedSizeInput.png   FixedSizeInput2.png

4.Click to complete the Reference Line.

5.View the result in the 3D window.

CW1_5.png     CW1_5_2.png

Chained Curtain Wall

Use the Chained geometry method to create a multi-segment Curtain Wall. The reference line is a polyline.

CW3Tool.png 

For each segment, you can set up a separate Scheme, with a distinct pattern for each - in Edit mode.

A Frame is always placed where two adjacent segments are joined. Such a Frame cannot be deleted. (If you wish, you can set its type to Invisible, by selecting the Frame in Edit mode and adjusting its Type in Frame Settings.)