Parameter

Short Description

Long Description

Angle (MEP)

Angle as defined in Route Specifi­cation

Relevant for circular duct elbows and pipe elbows. Defined in Route Specifications under Angle set.

Branch Diameter (MEP)

Diameter of the branch segment

Relevant for circular branch segments of routes.

Defined in the Duct and Pipe Branch Default Settings dialog box under Seg­ment.

Branch DN (MEP)

Nominal diameter of a branch

Relevant for circular branch segments of routes.

Defined in the Duct Default Settings dia­log box under Dimensions.

Branch Height (MEP)

Height of the branch segment.

Relevant for rectangular branch seg­ments of routes.

Defined in the Duct and Cable Carrier Default Settings dialog box under Seg­ment.

Branch Width (MEP)

Width of the branch segment.

Relevant for rectangular branch seg­ments of routes.

Defined in the Duct and Cable Carrier Default Settings dialog box under Seg­ment.

Custom Angle Branch (MEP)

Real angle of the branch

Relevant for duct and pipe branches. Defined during the modeling of the branch.

Custom Angle Elbow (MEP)

Real angle of the elbow

Relevant for duct and pipe Elbows. Defined during the modeling of the bend.

Description (MEP)

Description of the segment

Relevant for rectangular and circular elbow, branch, transition, pipe, and duct segments of routes.

Defined in the Duct, Pipe and Cable Car­rier Route Specifications in each table

Diameter (MEP)

Diameter of the segment.

Relevant for circular segments of routes.

Defined in the Duct and Pipe Route Default Settings dialog box under Seg­ment.

DN (MEP)

Nominal Diameter

Relevant for circular segments of routes. Defined in the Duct and Pipe Route Spec­ification dialog under Reference Set

Elbow Radius (MEP)

Radius of the elbow

Relevant for duct and pipe elbows. Defined in the duct and pipe specifica­tions in the tab of the respective bends under Table of Dimensions

Height (MEP)

Height of the segment cross-sec­tion.

Relevant for rectangular segments of duct routes.

Defined in the Duct Settings dialog box under Segment.

Insulation Thick­ness (MEP)

Thickness of the insulation

Relevant for circular and rectangular seg­ments of routes.

Defined in the Duct and Pipe Route

Default Settings dialog box under Seg­ment.

Length (MEP)

Length of the segment.

Relevant for rectangular and cirular duct, pipe, and cable carrier segments of routes.

Defined during modeling input.

Material Name (MEP)

Name of the used Material

Relevant for rectangular and circular duct, pipe, and cable carrier segments of routes.

Defined in the Route Specification

MEP System

Attribute assigned to MEP route (e.g Fresh Air, Heating)

Relevant for all MEP Elements.
For Routes: Defined in the default set­tings dialog under MEP System.
For Accessory, Terminals and Equip­ments: Defined in element settings, on Connection tab page.

Slope (percentage) (MEP)

The steepness of the segment.

Relevant to the route tools.

Defined in the Duct, Cable Carrier and Pipe Route Default Settings dialog box.

Wall Thickness (MEP)

Thickness of the wall of the duct or pipe.

For circular ducts and pipes: Defined in Route Specifications.
For rectangular ducts: Defined in the Duct Route Settings dialog box under Seg­ment.

Width (MEP)

Width of the segment cross-sec­tion.

Relevant for rectangular segments of duct routes.

Defined in the Duct Route Settings dialog box under Segment.