Component Listing Parameters in the Interactive Schedule

The table below lists the properties that are available to list components in the Interactive Schedule.

Note: Component area properties cannot be calculated for Morphs or basic non-veneer columns.

Use these parameters in the Component lists of the Interactive Element Schedule.

COMPONENT PROPERTY

DESCRIPTION

AVAILABLE FOR ELEMENTS

Component Cross Section Area

Area of the Component cross-section

 

Component Fill Outline Pen

Pen number

 

 

Component Thickness

As defined in the component

 

Component Type

Core, Finish, or Other

 

Component Volume (Net)

Volume of the component. All openings and holes are subtracted.

 

Component Volume (Gross)

Openings and holes are ignored.

 

Component Volume (Conditional)

Openings and holes are ignored in components that meet the conditions at Options > Project Preferences > Calculation Rules (“Ignore component holes...”)

PlaneRoof / PolyRoof

Shell

Slab

Beam

Beam Segment

Wall

Embodied Carbon

 

 

Embodied Energy

 

 

Mass

Calculated based on component's volume and the Building Material's Density value

 

Projected Component Areas:

Area is based on the projection of the virtual plane that runs through the center of the component.

 

Projected Component Area (Net)

Openings and holes are subtracted.

 

Projected Component Area (Gross)

Openings and holes are ignored.

Roof

Shell

Slab

Wall

Beam

Column

Projected Component Area (Conditional)

Openings and holes are ignored in components that meet the conditions at Options > Project Preferences > Calculation Rules ("Ignore component holes...")

Roof

Shell

Slab

Wall

Rectangular Component Height

Height of rectangular component in 2D

 

Rectangular Component Width

Width of rectangular component in 2D

 

Related Topics

Component Data in Archicad

Calculating Component Areas

Element Parameters