Opening Listing Parameters

Parameter

Short Description

Long Description

Center Height to Home Story

For opening in Wall or Beam.

Home Story: same as the Home Story of the opening's associated ele­ment.

Center Height to Project Zero

For opening in Wall or Beam.

 

Center Height to Wall Bottom

For opening in Wall.

 

Center Height to Wall Top

For opening in Wall.

 

Cut Symbol Name

Name of the Symbol for the opening's cut display

Opening Settings, Symbol panel

End Surface

Name of the surface applied to the end(s) of a limited Opening body

A limited Opening has one or two ends, where it meets but does not cut through the host element (e.g. niche or recess).
Has a value only if you used a surface override for the Opening ends (Opening Settings, Model panel)..

End Surface Area (Net, total)

Surface area of (one or both) ends of a limited Opening.

Reduced by any SEO's or holes.

Extrusion Surface

Name of the surface applied to the sides of the Opening body, where it cuts through the host ele­ments

Has a value only if you used a surface override for the Opening extru­sion (Opening Settings, Model panel).

Extrusion Surface Area (Net)

Surface area of the Open­ing body, where it cuts through the host elements.

Reduced by any SEO's or holes

Header Height to Home Story

For opening in Wall or Beam.

 

Header Height to Project Zero

For opening in Wall or Beam.

 

Header Height to Wall Bottom

For opening in Wall.

 

Header Height to Wall Top

For opening in Wall.

 

IDs of Cut Ele­ments

ID(s) of all the elements cut by this opening.

Use "Parent ID" to list the opening's associated element.

Limits

Infinite, or limited on one or both sides

 

Number of Cut Ele­ments

Number of elements cut by this opening

 

Orientation

Direction of the opening relative to its associated element: Aligned, Vertical, Horizontal or Custom angle

Shape

Square, Circle or Polygonal

 

Sill Height to Home Story

For opening in Wall or Beam.

Home Story is the same as that of the opening's associated element.

Sill Height to Proj­ect Zero

For opening in Wall or Beam.

 

Sill Height to Wall Bottom

For opening in Wall.

 

Sill Height to Wall Top

For opening in Wall.

 

Total Thickness

Combined thickness of all elements physically cut by this opening.

Uncut Symbol Name

Name of the Symbol for the opening's uncut display

Opening Settings, Symbol panel