Wall Listing Parameters

Parameter

Short Description

Long Description

 

Air Skin Thickness

Thickness of Wall skin whose struc­ture is defined as "Air skin"

Air Skin is defined at Options > Project Preferences > Calculation Rules.

Wall_AirSkinThickness.png 

Analytic Surface Area of Openings on the Inside Face

Surface Area of all Wall Openings (win­dows, doors, empty Openings) on the Wall's Inside Face.

Surface calculation is based on hole that results from cutting the GDL Openings out of the Wall.

Wall_AnalyticOpeningSurfaceOppositeReferenceSide.png 

Analytic Surface Area of Openings on the Out­side Face

Surface Area of all Wall Openings (win­dows, doors, empty Openings) on the Wall's Outside Face.

Surface calculation is based on hole that results from cutting the GDL Openings out of the Wall.

Wall_AnalyticOpeningSurfaceReferenceSide.png 

Analytic Volume of the Open­ings

Volume of all Wall Openings (windows, doors, empty Open­ings).

Volume calculation based on hole that results from cutting the GDL Openings out of the Wall.

Does not take SEO's into account.

Wall_AnalyticOpeningVolume.png 

Combined Width of Doors

Sum of the nominal widths (as defined in Door Settings) of all doors placed in the Wall.

 

Wall_CombinedDoorWidths.png 

Combined Width of Windows

Sum of the nominal widths (as defined in Window Set­tings) of all windows placed in the Wall

 

Wall_CombinedWindowWidths.png 

Length of the Wall Inside Face (Condi­tional)

Length of Wall along its Inside Face - this Length may be con­ditioned on a defined Calculation Rule.

Condition: Subtracts the Length of any Openings that exceed a given Length, as defined in Options > Project Preferences > Calculation Rules.

Wall_ConditionalLengthOppositeReferenceSide.png 

Length of the Wall Outside Face (Con­ditional)

Length of Wall along its Inside Face - this Length may be con­ditioned on a defined Calculation Rule.

Condition: Subtracts the Length of any Openings that exceed a given Length, as defined in Options > Project Preferences > Calculation Rules.

Wall_ConditionalLengthReferenceSide.png 

Surface Area of the Wall Inside Face (Con­ditional)

Surface Area of Wall on its Inside Face - this area may be conditioned on a defined Calculation Rule.

Condition: Subtracts the surface of any Openings that exceed a given area as defined in Options > Project Preferences > Calculation Rules.

Reduced by trims and SEO's.

Wall_ConditionalSurfaceOppositeReferenceSide.png 

Surface Area of the Wall Out­side Face (Condi­tional)

Surface Area of Wall on its Outside Face - this area may be conditioned on a defined Calculation Rule.

Condition: Subtracts the surface of any Openings that exceed a given area as defined in Options > Project Preferences > Calculation Rules.

Reduced by trims and SEO's.

Wall_ConditionalSurfaceReferenceSide.png 

Volume of the Wall Inside Face Component (Condi­tional)

Volume of skin on the Wall's Inside Face - this Volume may be conditioned on a defined Calcu­lation Rule.

Condition: subtracts the Volume of any Openings that exceed a given size, as defined in Options > Project Preferences > Calculation Rules.

Reduced by trims and SEO's.

Wall_AnalyticOpeningSurfaceOppositeReferenceSide00235.png 

Volume of the Wall Outside Face Com­ponent (Condi­tional)

Volume of skin on the Wall's Outside Face - this Volume may be conditioned on a defined Calcu­lation Rule.

Condition: subtracts the Volume of any Openings that exceed a given size, as defined in Options > Project Preferences > Calculation Rules.

Reduced by trims and SEO's.

Wall_ConditionalSkinVolumeReferenceSide.png 

End Thick­ness of the Wall

End thickness of trapezoid Wall.

Second thickness, assigned in Wall Set­tings to a trapezoid Wall.

Wall_EndThickness.png 

Geometry Method

Uniform, Trapezoid or Polygonal.

 

 

Surface Area of the Wall Inside Face (Gross)

Gross Surface Area of the Wall - includ­ing the surfaces of any Openings - on the Inside Face.

Reduced by trims. SEO's are ignored.

Wall_GrossSurfaceOppositeReferenceSide.png 

Surface Area of the Wall Out­side Face (Gross)

Gross Surface Area of the Wall - includ­ing the surfaces of any Openings - on the Outside Face.

Reduced by trims. SEO's are ignored.

Wall_GrossSurfaceReferenceSide.png 

Inside Face Surface

Name of the surface assigned to the Wall's Inside Face.

 

Wall_MaterialOppositeReferenceSide.png 

Length of Reference Line

Length of the Wall's Reference Line.

 

Wall_Length.png 

Length of the Wall at the Center

Length of the Wall, as measured from end to end along Wall's centerline.

 

 

Length of the Wall on the Inside Face

Length of the Wall, as measured from end to end along Wall's Inside Face.

 

Wall_LengthOppositeReferenceSide.png 

Length of the Wall on the Outside Face

Length of the Wall, as measured from end to end along Wall's Outside Face.

 

Wall_LengthReferenceSide.png 

Maximum Height of the Wall

Height of Wall at its highest point.

Roof crops are considered.

Trims and SOE's are ignored.

Wall_MaximumHeight.png 

Maximum Height of the Wall Skin on the Inside Face

Height of Wall skin, at its highest point, on the Wall's Inside Face.

Roof crops are considered.

Trims and SOE's are ignored.

Wall_MaximumSkinHeightOppositeReferenceSide.png 

Maximum Height of the Wall Skin on the Outside Face

Height of Wall skin, at its highest point, on the Wall's Out­side Face.

Roof crops are considered.

Trims and SOE's are ignored.

Wall_MaximumSkinHeightReferenceSide.png 

Minimum Height of the Wall Skin on the Inside Face

Height of Wall skin, at its lowest point, on Wall's Inside Face.

Roof crops are considered.

Trims and SOE's are ignored.

Wall_MinimumSkinHeightOppositeReferenceSide.png 

Minimum Height of the Wall Skin on the Outside Face

Height of Wall skin, at its lowest point, on the Wall's Out­side Face.

Roof crops are considered.

Trims and SOE's are ignored.

 

Surface Area of the Wall Inside Face (Net)

Surface Area of the Wall on the Inside Face.

Reduced by Openings, trims and Solid Element Operations.

Wall_SurfaceOppositeReferenceSide.png 

Surface Area of the Wall Out­side Face (Net)

Surface Area of the Wall on the Outside Face.

Reduced by Openings, trims and Solid Element Operations.

Wall_SurfaceReferenceSide.png 

Number of Columns

Number of Col­umns that intersect the Wall

 

Wall_NumberOfColumns.png 

Number of Doors

Number of Door ele­ments in the Wall

 

Wall_NumberOfDoors.png 

Number of Holes (Num­ber of Empty Openings)

Number of Empty Opening Objects in the Wall

 

Wall_NumberOfHoles.png 

Number of Windows

Number of Window elements in the Wall

 

Wall_NumberOfWindows.png 

Outside Face Sur­face

Name of the surface assigned to the Wall's Outside Face.

 

Wall_MaterialReferenceSide.png 

Reference Line loca­tion

As defined in Wall Settings (Outside Face, Inside Face or Center).

For composite Walls: can also be Core Outside, Core Inside or Core Center.

 

Wall Inside Slant Angle

Angle of a slanted Wall from the per­pendicular to its Inside Face.

 

Wall_SlantAngle2.png 

Wall Out­side Slant Angle

Angle of a slanted Wall from the per­pendicular to its Outside Face.

Same as the General "Slant Angle" parameter

Wall_SlantAngle1.png 

Wall Com­ponent Thickness on the Inside Face

For Composite Walls: Thickness of the skin on the Wall's Inside Face.

Each skin thickness is defined in Options > Element Attributes > Composite Struc­tures.

Wall_SkinThicknessOppositeReferenceSide.png 

Wall Com­ponent Thickness on the Out­side Face

For Composite Walls: Thickness of the skin on the Wall's Outside Face.

Each skin thickness is defined in Options > Element Attributes > Composite Struc­tures.

Wall_SkinThicknessReferenceSide.png 

Wall Com­ponent Vol­ume on the Inside Face (Net)

Net Volume of the skin on the Wall's Inside Face.

Subtracts Volumes of Openings within the skin

Reduced by trims and SEO's.

Wall_SkinVolumeOppositeReferenceSide.png 

Wall Com­ponent Vol­ume on the Outside Face (Net)

Net Volume of the skin on the Wall's Outside Face.

Subtracts Volumes of Openings within the skin

Reduced by trims and SEO's.

Wall_SkinVolumeReferenceSide.png 

Wall Slant Type

Straight, Slanted, or Double-slanted.

As defined in Wall Settings, Geometry and Positioning Panel

Wall_Complexity.png