Offset and Multiple Offset Constraints (Relative Construction Methods)
The Offset Constraint and Multiple Offset Constraint methods help you create elements that are at a given offset from a reference line, using any tool that has a linear or polygonal input method.
To draw an offset segment or offset polygonal element:
1.Activate the tool with which you want to draw the new element.
2.Choose or activate the Offset command using one of the following methods:
•the drop-down menu of the Drafting Aids toolbar
•the Control Box
See Control Box.
3.Draw a reference line or an open or closed reference polyline. The cursor displays the offset or multiple offset icon.
Note: You can, if you wish, create this polyline using the Magic Wand.
See Magic Wand.
4.Double-click to complete the reference line/polyline.
5.A rubber band outline appears; drag the cursor to the final location of the new element.
6.If you are using the regular Offset command: Click once to place the element.
7.If you are using Multiple Offset: drag and click as many times as the number of elements you wish to place; double-click, or click Cancel in the Control Box, to place the final element.