Parameter |
Short Description |
Long Description |
Fill Category |
As set in Fill Settings dialog: - Drafting fill - Cover fill - Cut fill - Cut fill - Building Material |
Fill Categories are used to group fills according to their function in the project. May be useful if you want to retain fill's physical properties (use Cut Fill/Building Material), for DXF/DWG Conversion, and for Energy Evaluation. |
Fill Holes Perimeter |
Perimeter of all holes in the Fill element |
|
Fill Perimeter |
Perimeter of the Fill element |
|
Fill Type |
Type of the Fill pattern (which is chosen from Fill pop-ups) |
To list the name of the Fill type instead: Use the Fill Type parameter in the "General" parameter group. |
Holes Surface Area |
Surface area of all holes in the Fill element |
|
Image name |
Name of the image-type file (for Fills with Fill type of "Image") |
Defined in the Fill Texture panel of the Fills dialog box, if the Fill type is Image |
Transparency |
For transparent Solid Fill types, lists the percentage transparency. |
E.g. 25%, 50%, 75%. All other fills have zero Transparency. |