Column Segment Listing Parameters
Parameter |
Short Description |
Long Description |
Core Height / Diameter |
For a rectangular or profiled Column Segment: One of the dimensions of the Segment in cross-section. (The other dimension is "Core Width".) Does not include veneer. (To include veneer, use the General "Width" parameter.) |
For a circular Column Segment: the diameter of the Segment. |
Core Width |
For a rectangular or profiled Column Segment: One of the two dimensions of the Segment in cross-section. (The other dimension is "Core Height / Diameter".) Does not include Veneer. (To include veneer, use the General "Width" parameter.) |
For a circular Column Segment: the diameter of the Segment. |
Cross Section |
Rectangular, Circular or Profiled. |
Defined in Column Settings |
Ends Surface |
Surface assigned to Column Segment Ends. |
Defined in Column Segment Settings (via Building Material, or Override in Model Panel) |
Extrusion Surface |
Surface assigned to Column Segment Extrusion. |
Defined in Column Segment Settings (via Building Material, or Override in Model Panel) |
Gross Surface Area of the Core |
Gross Surface Area of the Column Segment Core on all sides. |
Surfaces of the Column Segment top/bottom are ignored. Solid Element Operations are ignored. |
Gross Surface Area of the Core Bottom |
Surface area of the cross-section of the Core at the bottom of the Column Segment. |
Does not take any Solid Element Operations into account. |
Gross Surface Area of the Core Top |
Surface area of the cross-section of the Core at the top of the Column Segment. |
Does not take any Solid Element Operations into account. |
Gross Surface Area of the Veneer |
Gross Surface Area of the Column Segment Veneer on all sides. |
Surfaces of the Veneer top/bottom are ignored. Solid Element Operations are ignored. |
Gross Surface Area of the Veneer Bottom |
Surface area of the cross section of the Veneer at the bottom of the Column Segment. |
Does not take any Solid Element Operations into account. |
Gross Surface Area of the Veneer Top |
Surface area of the cross section of the Veneer at the top of the Column Segment. |
Does not take any Solid Element Operations into account. |
Gross Volume of the Core |
Gross Volume of the Column Segment Core. |
Solid Element Operations are ignored. |
Gross Volume of the Veneer |
Gross Volume of the Column Segment Veneer. |
Solid Element Operations are ignored. |
Net Surface Area of the Core |
Net Surface area of the Column Segment Core on all sides (but not the top or bottom). |
Surfaces of the Column Segment top/bottom are ignored. Reduced by Solid Element Operations. |
Net Surface Area of the Core Bottom |
Surface area of the cross-section of the Core at the bottom of the Column Segment. |
Reduced by Solid Element Operations. |
Net Surface Area of the Core Top |
Surface area of the cross-section of the Veneer at the top of the Column Segment. |
Reduced by Solid Element Operations. |
Net Surface Area of the Veneer Bottom |
Surface area of the cross-section of the Veneer at the bottom of the Column Segment. |
Reduced by Solid Element Operations. |
Net Surface Area of the Veneer Top |
Surface area of the cross-section of the Veneer at the top of the Column Segment. |
Reduced by Solid Element Operations. |
Net Volume of the Column Core |
Net Volume of the Column Segment Core. |
Reduced by Solid Element Operations. |
Net Volume of the Veneer |
Net Volume of the Column Segment Veneer on all sides. |
Reduced by Solid Element Operations. |
Veneer Building Material |
Name of Building Material assigned to Veneer |
Defined in Column Settings |
Veneer Surface Area |
Net Surface area of the Column Segment Veneer on all sides |
Surfaces of the Veneer top/bottom are ignored. Reduced by Solid Element Operations. |
Veneer type |
Core, Finish or None |
Defined in Column Settings This setting affects the display of the Column Segment, depending on Partial Structure Display Settings. |