Creator Metrics and Analysis
Understand how your design performs as it develops. You can check compliance and zoning limits, review project and Unit data, study sunlight and shadows, assess outdoor conditions, and estimate whole-life carbon.
Analysis results update from the current model, helping you compare design decisions and identify issues early.
Available analyses
|
Analysis |
Use it to |
|---|---|
|
|
Check the design against requirements such as Building Coverage Ratio, Floor Area Ratio, and other defined Site targets. |
|
|
Check whether the Building remains within the Site’s 3D Constraints, including applicable setbacks, height limits, and building envelope. |
|
|
Review calculated area data for the project, Sites, Buildings, and other model elements. |
|
|
Review Unit-related data, including the current Unit mix and distribution. |
|
|
Review sun exposure at a selected date and time, and explore how sunlight moves across the model. |
|
|
Review shadows cast by the proposed design and surrounding context at a selected date and time. |
|
|
Assess outdoor environmental conditions around the project, such as wind, temperature, and pedestrian comfort. |
|
|
Assess how the proposed building mass affects airflow across the site under selected wind conditions. |
|
|
Estimate the carbon impact of one or more selected Buildings throughout their life cycle. Whole-life carbon considers emissions associated with a building over its life cycle, not only its operational use. |
How analysis works
Select an item from the Data and Analytics bar to open the corresponding metrics view or analysis workflow. Results are based on the current model; changes to the Site, Buildings, Contextual Buildings, Floors, Units, or Design Option can affect the outcome.
Some analyses use the current selection:
- Area Metrics can show combined information for all Sites and their Buildings when nothing is selected. Select a Site or Building to focus the information on that element.
- Unit Metrics shows Unit-related information for the selected Building.
- Whole Life Carbon Analysis lets you analyze one Building individually or multiple selected Buildings together.
Other analyses do not require a selection:
- Sun study, Shadow study, and Microclimate run against the project model and its surrounding context.
- Select the study type, set the required conditions—such as date and time where applicable—and run the analysis.
- Review the color-coded results in the model, then adjust the design and run the analysis again to compare the outcome.
For example, after increasing a Building’s height, run Compliance Check to confirm that it remains within the 3D Constraints, then run a Shadow study to understand how the change affects the Site and nearby context.
When to use analysis
Run analysis throughout the design process, not only at the end.
- Define the Site, 3D Constraints, and Compliance Targets.
- Create or update Buildings and Contextual Buildings.
- Review compliance and area information as you model.
- Run sun, shadow, microclimate, and carbon analyses to test the design’s performance.
- Compare results across Design Options and refine the design.
- Rerun relevant analyses after meaningful changes to the design.
Related sections
- Create a Site — Define the project boundary, 3D Constraints, and Compliance Targets.
- Create a Building — Create and edit Building massing, Floors, and Building Properties.
- Contextual Buildings — Add and refine surrounding context for more representative analysis results.
- Design Options — Create and compare alternative design proposals.
- Data and Analytics bar — Learn where to access metrics and analysis tools in the interface.